Platform for design light electric vehicles (LEV)
A unified control system for electric vehicles, such as electric bike, motorbike, scooter, golf car. All components are synchronized with each other in order to effectively and smoothly control electric vehicles.

Electronics kit

All devices are connected by CAN-bus. Each component can be used separately with devices from other manufacturers.
For controlling a permanent magnet motor
On-board computer
To display the basic parameters, set the modes of motion and control.
Battery Management System
Battery Management System (BMS) is a system for controlling the energy consumption of a battery.

Components owerview
We offer components for self-assembly of light electric vehicles. If you are an electric vehicles
development company, we can become your OEM partner, which will save a lot of time and
effort, thanks to a reduction in the cost of research, development, testing and support of your
own components. Using our line of solutions you get constant technical support and software updates.
6F | 12F | 24F
Battery Management System (BMS) 16S | 24S
6F | 12F | 24F
A powerful ARM microprocessor provides precise and smooth control of the BLDC motor. The controller settings are widely configured - you can set parameters, power strokes of the gas handle, fully customized to your needs. The controller achieves an efficiency of 99% due to the powerful MOS transistors and special PWM algorithms. Compact size allows you to install it in any suitable place on vehicles with different dimensions — from scooters to ATVs or golf carts.

Voltage monitoring on all motor phases, power supply, system supply 12V and 5V

Synchronous rectification, ultra low drop, fast PWM to achieve very high efficiency

Direct phase current senseHardware over current protection

Configurable limit for motor and battery current

Electric brake different modes available

Battery protection: over current, over voltage and under voltage protection

Motor and controller temperature protection

Support motors with any number of poles

Up to 100,000 electric RPM (ERPM = Pole pair * RPM)

Auto-detect 60 degree or 120 degree hall position sensors

Support torque mode, speed mode, and combined operationInstant throttle response, no lag

Aluminum housing for maximum heat dissipation, dual side FET for best heat distribution

Wide types of input, configurable: 0-5V brake, switch brake, 0-5V throttle, torque pedal sensor, pedal assist sensor

Configurable from Display or bluetooth with smartphone

Auto no-operation shut down

Various modes of control: sensorlesless, square, combined, FOCCAN bus

Multiple controllers on CAN bus may exist (open protocol LEVCAN)

Charge mode through motor with contoller, plug any DC supply to controller to charge your battery
Technical specifications
Micro Nucular 6F
Nucular 12F
Thermo Nucular 24F
Maximum power
4 000W
10 000W
20 000W
Nominal power
2 000W
5 000W
10 000W
Voltage range
Phase max
Battery max
Supply out
12V 1A
12V 1A
12V 1A
Operating Temperature Range
-30°C to 80°C
-30°C to 80°C
-30°C to 80°C
Phase wires
10AWG 5 mm bullets
8AWG XT150
6AWG terminals
Battery wires
12AWG XT60
10AWG XT90
8AWG XT150
Control modes
Square, sensorless, FOC, charger
Square, sensorless, FOC, charger
Square, sensorless, FOC, charger
Temperature and hardware overcurrent protection
Temperature and hardware overcurrent protection
Temperature and hardware overcurrent protection
Sleep current less
Protection class
Size, without wires
70x34x100 mm
86х43х125 mm
86х43х185 mm
280 g
525 g
1100 g
On-board computer
The on-board computer is equipped with the large sun light resistant screen to display main parameters, driving modes settings, software updates for all system components, battery control, and the charging state of the devices via USB.
Charge, speed, power, current, voltage and etc. display

Shows information from all devices on CAN-bus

Software update for devices from MicroSD card and parameter setup

Integrated accelerometer

A lot of control inputs, use just single wire from Display to Controller

Handly panel with connectors on backside, no need for external waterproof connectors

GoPro mount to steering tube included

Configurable fonts, multilanguage

Big, visible under direct light LCD

Embedded light sensor for bright control and headlight

LCD heater for protection from condensate and for winter
Technical specifications
LCD size 3.6"

FSTN, monochrome

Screen resolution 240x128 px

Screen heating

RGB-button backlight
MicroSD slot

USB-charger 5.2V 2А

Password protection


IP65 class
Battery Management System (BMS) 16S | 24S
Battery Management System is a system for controlling the energy consumption of a battery. BMS protects each element in the batteries from discharging and recharging. An adaptive battery balancing algorithm accelerates the time of voltage equalization between its elements. For cold weather, the BMS provides for heating the battery. The wattmeter calculates how much energy was used and shows the statistics of energy consumption. The user is able to see the state of charge of the battery and the error diagnosis on the information screen.

In developing. Pre-order will be available later.
Will be available later
Technical specifications
Will be available later
Video overview
Update 21.05.2018
Added sinus motor control, cruise, reverse, speed and traction control modes, autostart charging via motor. Engine detection was updated.
If you have any questions please feel free to contact our customer support.
Ждем ваш вопрос!
Заполните форму ниже
Политика обработки персональных данных
We accept pre-orders for electronic kits without any prepayment.
We deliver by couriers to more than 200 countries, price includes shipping.
To place a pre-order, fill out the form below.
Micro Nucular Controller 6F with On-board computer — 240$
ETA June-July 2019
Nucular Controller 12F with On-board computer — 350$
ETA June-July 2019
Additional Nucular controller 12F — 240$
ETA June-July 2019
Termo Nucular Controller 24F with On-board computer
Approx. 500~600$, ETA summer 2019
After placing the pre-order, we will contact you to clarify the address and time of delivery.
Click to order
Your order:
Your contacts

Be the first who knows our news!

We will notify you of the release of new features and firmware for the LEV platform. And no spam of course.
Our contacts
If you want to become our dealer or the manufacturer of electric vehicle, don't hesitate to contact us. We will happy to discuss the terms of cooperation.
+7 (495) 921-64-32
Russian Federation, 121059, Moscow, Berezhkovskaya embankment, 20, building 6